Ecologix Environmental Systems - click to go to home page Air & Water Treatment Solutions - (888)326-2020/(678)514-2100 Click to Find Us On:

Follow Us on Twitter     Find Us on LinkedIn
 Applications
 Automotive
Biodiesel
Dairy Industry
Industrial Wastewater
Food Processing Industry
Iron Removal
Latex Removal
Metals Treatment
Mining Industry
Municipal Wastewater
Odor Control
Petrochemical Industry
Poultry Industry
arrow Products
Activated Carbon
Bag Filtration
Biological Treatment
Chemicals (Specialty)
Clarifiers
Controls
Dissolved Air Flotation
Dewatering
Evaporators
Membrane Filtration
Microbial Bacteria
Oil/Water Separators
Ozone
Pressure Filtration
Automatic Pressure Filters
Liquid Phase Filters
Vapor Phase Filters
Screens
Separators/Strainers
Tanks

Pressure Filtration > Multi-Media In-Line Filter Systems

Ecologix high rate automatic backwashing Multi-Media Filters are designed for enhanced capacity water filtration. These permanent media automatic backwashing filters will remove organic and/or inorganic suspended solids down to 5 microns and below in size and will entrap greater amounts of suspended solids contaminants than sand media filters. Through the use of automatically controlled backwashing, the filter will operate "on-line" for extended periods of time prior to the short backwashing cycle. Automatic filter operation is monitored on both elapsed time as well as pressure differential. When the controller "calls" for a backwash as a result of pressure differential or elapsed time, the backwashing function utilizes a portion of the clean filtered water produced by the system to clean the media bed. Single tank systems utilize unfiltered water for backwashing. Optional external backwash water sourcing systems are available for both single and multiple tank systems.
The Ecologix Multi-Media Filter utilizes a vertical side shell depth of 60" with layered graded beds of filtration media. Through the use of multiple layers of specially selected filter media, "progressive filtration" is achieved through the media layers. The first layer of filter media entraps and holds larger sized particles allowing smaller particles to be removed in subsequent media layers. The final media layer "polishes" the water removing suspended solids down to 5 microns in size and smaller.

Our Multi-Media Filters are ideally suited for use where stringent water quality standards are required or where higher levels of suspended solids are present. These applications can include re-use applications, water pre-treatment applications for reverse osmosis and de-ionization systems, or as a pre-treatment system prior to disposable bag or cartridge filters. Our Multi-Media Filters are also widely used as primary filters for removal of suspended solids in incoming plant water or in waste water clean up applications. Air scour and surface wash options are available if required.

Removal of Suspended Solids Down to 5 Microns and Below

Model Normal GPM Peak GPM Media Cu. Ft Total Area Sq. Ft. Backwash GPM In/Out Size Max. PSI L W H
MM-2460-1A 16-47 63 12.0 3.15 47 2" 100 3' 1" 2' 4" 8' 0"
MM-2460-2A 32-95 126 24.0 6.30 47 3" 100 4' 5" 2' 4" 8' 6"
MM-2460-3A 48-142 189 36.0 9.45 47 3" 100 6' 9" 2' 4" 8' 6"
MM-3060-1A 25-74 98 20.0 4.91 74 3" 100 4' 8" 2' 9" 8' 6"
MM-3060-2A 50-147 196 40.0 9.82 74 4" 100 5' 5" 2' 9" 8' 8"
MM-3060-3A 75-221 294 60.0 14.73 74 4" 100 8' 3" 2' 9" 8' 8"
MM-3660-1A 35-107 142 28.5 7.10 107 3" 100 4' 8" 3' 3" 8' 10"
MM-3660-2A 70-213 284 57.0 14.20 107 4" 100 6' 5" 3' 3" 9' 3"
MM-3660-3A 105-320 426 85.5 21.30 107 4" 100 9' 9" 3' 3" 9' 3"
MM-4860-1A 63-189 252 51.5 12.60 189 4" 80 5' 7" 4' 3" 9' 10"
MM-4860-2A 126-378 504 103.0 25.20 189 6" 80 8' 5" 4' 3" 10' 2"
MM-4860-3A 189-567 756 154.5 37.80 189 6" 80 12' 9" 4' 3" 10' 2"
MM-4860-4A 252-756 1008 206.0 50.40 189 8" 80 17' 1" 4' 3" 10' 4"
MM-4860-5A 315-945 1260 257.0 63.00 189 10" 80 22' 2" 4' 3" 10' 2"
MM-4860-6A 378-1134 1512 309.0 75.60 189 10" 80 26' 6" 4' 3" 10' 2"
MM-5460-1A 80-239 318 65.5 15.91 239 4" 80 5' 10" 4' 9" 10' 4"
MM-5460-2A 160-477 636 131.0 31.82 239 6" 80 9' 4" 4' 9" 10' 8"
MM-5460-3A 240-716 954 196.5 47.73 239 6" 80 14' 2" 4' 9" 10' 8"
MM-5460-4A 320-955 1272 262.0 63.64 239 8" 80 19' 9" 4' 9" 10' 10"
MM-5460-5A 400-1193 1590 327.5 79.55 239 10" 80 24' 7" 4' 9" 10' 8"
MM-5460-6A 480-1432 1908 393.0 95.46 239 10" 80 29' 5" 4' 9" 10' 8"

Standard Systems Include:
  • Filtered water backwash on multi-tank systems
  • All interior surfaces fusion epoxy coated with Scotchkote 134
  • Advanced solid state automation with elapsed timer and differential pressure control
  • Skid mounted on structural steel skid
  • Liquid filled stainless steel pressure gauges
  • Flanged in/out standard (grooved - optional)
  • Automatic diaphram operated non-corrosive brass or cast iron valves
  • Systems provided with interconnecting piping
  • Removeable 304 stainless steel underdrain standard
  • ASME code stamped available
  • Filtration media is included in the system package