Below Ground Oil Water Separators

Oil water separators are typically installed in industrial and maintenance areas to capture oily wastewater. Our HQB below ground oil water separators will assist in the removal of large quantities of free and mechanically emulsified oil from your wastewater. Request a Quote

Technical Featureshqb below ground oil water separator

  • HQB Oil Water Separators are versatile and can be used in many different applications.
  • Plasteel Elutron Jacketed Oil Water Separators are in a unique double wall jacketed construction with 360 degree interstitial monitoring.
  • Primary tank of welded steel construction in accordance with UL 58.
  • The steel tank is coated with FRP coating to provide exterior protection to the primary tank from underground exposure. It has been successfully tested to UL 1746 requirements for corrosion protection.
  • Cathodic protection and/or dielectric isolation not required.
  • The Unipack cross fluted plates are manufactured of PVC, CPVC, PP, SS, or FRP.
  • Sizes available up to GPM.

Benefits

  • Low maintenance cost
  • Easily cleaned through the removable vapor tight cover(s)
  • No moving parts or consumables
  • No power consumption
  • No chemicals, absorbent or filter cartridges to remove, replace or dispose of
  • Service & maintenance of coalescing media and removal of sludge from outside
  • No confined spaces
  • Shallow burial depth

Dimensional Parameters for Ecologix Below Ground Oil Water Separators

MODEL DIA. LENGTH INLET OUTLET FLOW RATE TANK CAPACITY (GAL.) OIL SPILL CAPACITY (GAL.)
HQB342 3' - 9 " 4' - 5 " 4" 4" 20 400 320
HQB548 4' - 0" 6' - 3 " 4" 4" 50 600 480
HQB1048 4' - 0" 10' - 9" 6" 6" 100 1000 800
HQB2064 5' - 4" 12' - 0" 6" 6" 200 2000 1600
HQB3064 5' - 4" 18' - 0" 8" 8" 300 3000 2400
HQB4072 5' - 4" 24' - 0" 8" 8" 400 4000 3200
HQB5072 6' - 0" 23' - 10" 8" 8" 500 5000 4000
HQB6072 6' - 0" 28' - 8" 10" 10" 600 6000 4800
HQB7096 7' - 0" 24' - 4 " 10" 10" 700 7000 5600
HQB8096 7' - 0" 28' - 0 " 10" 10" 800 8000 6400
HQB9096 8' - 0" 24' - 0" 12" 12" 900 9000 7200
HQB10096 8' - 0" 26' - 8" 12" 12" 1000 10,000 8000
HQB12096 8' - 0" 32' - 0" 12" 12" 1200 12,000 9600
HQB15120 10' - 0" 25' - 6" 14" 14" 1500 15,000 12,000
HQB20120 10' - 0" 34' - 0" 18" 18" 2000 20,000 16,000

System Schematic

Below Ground Oil Water Separator Flow Schematic

Operation

The separator is a special purpose prefabricated parallel corrugated plate gravity displacement type oil/water separator designed to remove free and dispersed non-emulsified oil and sellable solids, in accordance with API 421. The separator capacities, dimensions, and construction will be in strict accordance with UL 58, and UL 1746.

Inlet Compartment

The inlet chamber will be comprised of a non-clog diffuser pipe to distribute the flow across the width of the separator chamber. The inlet compartment shall be of sufficient volume to effectively reduce influent suspended solids, dissipate energy and begin separation. A sludge baffle will be provided to prevent settlable solids and sediment from entering the separation chamber.

Separation Chamber

The separation chamber will contain parallel corrugated plates for enhanced oil/water separation. The plates will be spaced for optimum removal of free oil and settleable solids, and the corrugations will have a 45 degree angle with respect to the horizontal. Flow through the plate pack will be in a cross-flow configuration. This allows the oil to collect and coalesce in the high points of the corrugations while the solids collect at low points. This also allows oil to rise without interfering. Plates shall be enclosed in a stainless steel frame to facilitate installation and removal.

Sludge Chamber

The sediment chamber will be located prior to the separation chamber and will provide an adequate volume and baffling for the settling of any solids.

Oil Storage Reservoir

The waste oil storage is an integral part of the separator, and has a capacity of 40 percent of the total separator volume. Oil will flow from the separator by gravity or can be pumped away when the oil water interface reaches a predetermined depth.

Clean Water Chamber

A clean water chamber which allows the water to leave the separator by gravity flow through the clean water drop tube and outlet flange will be provided.

Covers

Manways and vaults will provide access into the separator. Each accessway will be provided complete with extensions, bolt down cover, gasket, and bolts.

Vents and Hold Down Strap

Sufficient size vents and hold down straps will be provided.

Performance

Most extensive performance guarantees offered in the industry. Removes free oil droplets as small as 40 microns. Reduces effluent free oil concentration to 10 PPM or less. Factory tested prior to shipment. Performance Guarantee Based on Influent Characteristics. Elutron tanks carry a (5) five year warranty on material and workmanship and (30) years against external corrosion. P.E. Stamped Calculations for Reynolds Number and Stokes Law.

Spam Filter