H2Ozone 60
The H2Ozone 60 Ozone Injection System is designed to quickly integrate into an existing water line. This system produces 60 g/hr of ozone and is able to inject this ozone into water flows up to 125 GPM. This water can be used for food processing, surface disinfection or basic water treatment. Request a Quote
Features
- Introduces 60 grams/hour ozone into up to 140 GPM water flows
- Produces ozone from integrated oxygen concentrator
- Provides 100 GPM water flows with 2.0 ppm dissolved oxygen level
- Dimensions: 36" L x 42"W x 72"H
- Customizable system can be configured for any application
- Stainless steel ASME off-gas tank
- Stainless steel pump with viton seal
- Tri-clamp connections
- Included water trap protects against water damage
H2Ozone 60 Specifications
| Flow Rate | Up to 125 GPM water flow (flow rates from 5-125 GPM are acceptable) | |||
| Ozone Production | 60 gm/hr | |||
| Oxygen Production | 20 LPM O2 @ 93% purity | |||
| Capacity | Will dissolve ozone into water at the following rates: 50 GPM with 4.0 PPM Ozone 100 GPM with 2.0 PPM Ozone Dissolved ozone levels of at least 2.0 PPM at 100 GPM |
|||
| Wetted Materials | Stainless Steel, Viton seals & Kynar injector | |||
| Power Required | 220V/60Hz (220V/50Hz Available) | |||
| Remote Start | System can be started remotely using provided contacts in the controller | |||
| Ozone Generation Method | Via corona discharge using dry air | |||
| Maximum Operating Pressure | 50 PSI (3.5 Bar) | |||
| Maximum Water Pressure | 100-PSI (7 bar) | |||
| Water Connection | 2-in Tri-Clamp inlet & outlet | |||
| Water Pressure Drop at 50 gpm | less than 3 PSI | |||
| Warranty | 1-year | |||
| Dimensions | 36" L x 42"W x 72"H | |||
| Weight | 625 lbs | |||
| Optional Equipment | ||||
|---|---|---|---|---|
| Water Flow Switch | Will start and stop system automatically based upon water flow | |||
| Dissolve Ozone Sensor | Monitors, displays, and controls actual ozone levels in the water | |||
| ORP Monitor | Monitors ORP level in the water, will also control dissolved ozone levels in the water | |||
| Ambient Temp Sensor | Monitors Ambient temperature to protect ozone generator and oxygen concentrator | |||
| Ambient Relative Humidity Sensor | Monitor Relative Humidity to protect the oxygen concentrator and shuts down O2 Concentrator | |||
| Hour Meter | Displays Ozone generator run time, good for determining required maintanance intervals | |||
| Ozone Destruct Unit | Will revert all excess ozone from the contact tank to oxygen | |||
| Plant Compressed Air | Use customer supplied compressed air and remove system compressor and replace with pressure regulator, and filter and offers lower power consumption and less system maintenance | |||
| Remote Ozone Monitor | Will monitor ozone in a remote location, useful when the Waterzone system will placed remotely from the point of use | |||